Table of Contents v2.0 32-bit serial key or number

Table of Contents v2.0 32-bit serial key or number

Table of Contents v2.0 32-bit serial key or number

Table of Contents v2.0 32-bit serial key or number

CodeMeter and WibuKey Driver Downloads

CodeMeter (hardware and software based) and WibuKey (hardware-based) are protection keys for Archicad and other GRAPHISOFT products. A protection key is necessary to run Archicad and other GRAPHISOFT products in commercial mode.

Short Introduction

The CodeMeter protection key (software or hardware-based) represents your license to use Archicad. You can use it to transfer the license from one machine to another. It is also possible to borrow a license for a particular machine for a limited time, without having to transfer the physical network protection key itself. Thus, the CodeMeter technology significantly reduces the risk of a lost or stolen hardware key.
An office using Archicad will probably have one network key and several CodeMeter keys (software-based license keys or physical CodeMeter keyplugs). If the user plans to be out of the office or offline, three options are available:

In the first two cases, the user borrows the license for a fixed period. The license can be returned by the user, or else it will expire automatically when the borrowing period ends; at this time, the license again becomes available for borrowing from the site key.

Please keep in mind that if a computer is damaged or the CmStick is lost, the user cannot return the borrowed license, which thus remains unavailable until the borrowing period expires. So it makes sense to set borrowing time limits wisely.

You can learn more about CodeMeter protection on HelpCenter.


Important Notes before Installation

  • When installing CodeMeter you must be logged on as a member of the Administrator Group.
  • The drivers below were tested by GRAPHISOFT to use with Archicad. To activate purchased licenses on your key, follow our activation steps: https://www.graphisoft.com/downloads/licensing/
  • Before uninstalling or installing CodeMeter drivers on computers from/to which CodeMeter licenses were borrowed, it is very important to make sure that all licenses are returned!
  • Remove the keyplug before you are installing the driver.
  • Please quit the browser during the WibuKey driver installation.

CodeMeter Drivers

For Archicad 10 to Archicad 24

Download the appropriate installer for your computer’s operating system. By double-clicking on the downloaded file the installer wizard will automatically start and guide you through the rest of the installation.
This CodeMeter driver version can be used with Archicad version 10 to version 23.
If you want to use Archicad version 10 to version 12 with a CodeMeter protection key please install the CodeMeter Enabler.

This CodeMeter driver supports:

  • Windows 10, Windows 8.1, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
  • macOS 10.15, macOS 10.14, macOS 10.13, macOS 10.12
Download Windows macOSLast modified
CodeMeter Driver version 7.00
38.1 MB

25.9 MB
July 8, 2020

Note: This is how to uninstall CodeMeter driver:

  • Windows: Open “Control Panel” and select “Programs and Features” or “Add or Remove Programs” to remove all CodeMeter components from your computer.
  • macOS: Start “CmUninstall” application within the downloaded installer package to remove all CodeMeter components from your computer.

CodeMeter Protection Key Updater

With the macOS 10.13 (High Sierra), Apple introduced strict policy regarding the USB devices which use Kernel Extension. CodeMeter hardware keys distributed by GRAPHISOFT use Kernel Extension 3G. In order to keep the stability and flexibility of our protection keys, they must be configured as HID (Human Interface Device). Download the standalone Protection Key Updater from here.

WibuKey Drivers

For Archicad 10 to Archicad 18

This WibuKey driver supports:

  • Windows 10, Windows 8.1, Windows 8, Windows Server 2012 R2, Windows Server 2016
  • macOS 10.9 and above

Note for MAC users:

  • WibuKey driver requires Java 6 to work properly. If it is not present on your computer use the Java 6u32 installer to install Java 6 separately. Running Wibu Server on macOS can result in connection issues.
  • The WibuKey Driver version 6.52 brings macOS 10.15 Catalina compatibility.

Note for users on Windows 8 and later: this driver only runs with single WibuKey.

Download WindowsMac OS XLast modified
WibuKey Driver version 6.52 for macOS 10.15N/A
9.8 MB
Nov 13, 2019
WibuKey Driver version 6.40
21.1 MB

7.6 MB
Nov 14, 2018

For Archicad 7 to Archicad 9

This WibuKey driver supports:

  • Windows 7, Windows Vista, Windows XP, Windows 2000
  • Mac OS X 10.7, Mac OS X 10.6, Mac OS X 10.5, Mac OS X 10.4

Note for MAC users: WibuKey driver requires Java 6 to work properly. If it is not present on your computer use the Java 6u32 installer to install Java 6 separately.

Download Windows 32-bit Windows 64-bit Mac OS XLast modified
WibuKey Driver version 6.00b for Windows and 6.00a for Mac
13 MB

14 MB

9 MB
Oct 25, 2012

WkMAC.LIB for Archicad 9 on Mac OS X 10.6 (Snow Leopard)

This component is necessary for those using Archicad 9 on Snow Leopard. Unarchive this file and put into the Library:CFMSupport folder on your HD.

Download Windows Mac OS XLast modified
WkMAC.LIB for Archicad 9 on Mac OS X 10.6
3 KB
Sept 7, 2009

CodeMeter Enabler Downloads

CodeMeter Enabler lets you run Archicad 10, 11, and 12 with a CodeMeter hardware key.
Note: this tool was only available for users with Archicad 13 or later licenses.

Notes

  • CodeMeter enabler is available on WindowsandIntel Mac platforms. CodeMeter is not supported on Mac PPC systems.
  • Make sure your Archicad is up-to-date: use ‘Check for Updates…’ command in Archicad’s Help menu. CodeMeter enabler will only work with a minimum Archicad build 2815.
  • Do not remove the WibuKey driver from your system. Both CodeMeter and WibuKey drivers need to be installed. 

Installation Steps

  • Read notes for CodeMeter enabler above.
  • Download and install CodeMeter enabler below – it will copy the necessary components in your Archicad folder.
  • If you have not installed a CodeMeter driver yet, download and install the latest CodeMeter driver. CodeMeter driver is also installed with Archicad, but only if this option was selected during the Archicad install process for these legacy versions.

  • CodeMeter Enabler (build 2815)
    • Does NOT support Software Key
    • Installer compatible with Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, Mac OS X 10.8
Downloads for CodeMeter Enabler Windows Mac OS XLast modified
CodeMeter Enabler for Archicad 12 (build 2782)
61.6 MB

56.2 MB
Sep 10, 2018
CodeMeter Enabler for Archicad 11 (build 1259)
61.6 MB

70.0 MB
Sep 10, 2018
CodeMeter Enabler for Archicad 10 (build 1188)
61.6 MB

71.7 MB
Sep 10, 2018
Источник: [https://torrent-igruha.org/3551-portal.html]
, Table of Contents v2.0 32-bit serial key or number

Sysinternals Utilities Index

Sysinternals Suite
The entire set of Sysinternals Utilities rolled up into a single download.

Sysinternals Suite for Nano Server
Sysinternals Utilities for Nano Server in a single download.

Sysinternals Suite for ARM64
Sysinternals Utilities for ARM64 in a single download.

AccessChk
v6.20 (November 19, 2017)
AccessChk is a command-line tool for viewing the effective permissions on files, registry keys, services, processes, kernel objects, and more.

AccessEnum
v1.32 (November 1, 2006)
This simple yet powerful security tool shows you who has what access to directories, files and Registry keys on your systems. Use it to find holes in your permissions.

AdExplorer
v1.44 (November 15, 2012)
Active Directory Explorer is an advanced Active Directory (AD) viewer and editor.

AdInsight
v1.2 (October 26, 2015)
An LDAP (Light-weight Directory Access Protocol) real-time monitoring tool aimed at troubleshooting Active Directory client applications.

AdRestore
v1.1 (November 1, 2006)
Undelete Server 2003 Active Directory objects.

Autologon
v3.10 (August 29, 2016)
Bypass password screen during logon.

Autoruns
v13.98 (June 24, 2020)
See what programs are configured to startup automatically when your system boots and you login. Autoruns also shows you the full list of Registry and file locations where applications can configure auto-start settings.

BgInfo
v4.26 (October 19, 2018)
This fully-configurable program automatically generates desktop backgrounds that include important information about the system including IP addresses, computer name, network adapters, and more.

BlueScreen
v3.2 (November 1, 2006)
This screen saver not only accurately simulates Blue Screens, but simulated reboots as well (complete with CHKDSK), and works on Windows NT 4, Windows 2000, Windows XP, Server 2003 and Windows 95 and 98.

CacheSet
v1.0 (November 1, 2006)
CacheSet is a program that allows you to control the Cache Manager's working set size using functions provided by NT. It's compatible with all versions of NT.

ClockRes
v2.1 (July 4, 2016)
View the resolution of the system clock, which is also the maximum timer resolution.

Contig
v1.8 (July 4, 2016)
Wish you could quickly defragment your frequently used files? Use Contig to optimize individual files, or to create new files that are contiguous.

Coreinfo
v3.31 (August 18, 2014)
Coreinfo is a new command-line utility that shows you the mapping between logical processors and the physical processor, NUMA node, and socket on which they reside, as well as the cache’s assigned to each logical processor.

Ctrl2cap
v2.0 (November 1, 2006)
This is a kernel-mode driver that demonstrates keyboard input filtering just above the keyboard class driver in order to turn caps-locks into control keys. Filtering at this level allows conversion and hiding of keys before NT even "sees" them. Ctrl2cap also shows how to use NtDisplayString() to print messages to the initialization blue-screen.

DebugView
v4.90 (April 23, 2019)
Another first from Sysinternals: This program intercepts calls made to DbgPrint by device drivers and OutputDebugString made by Win32 programs. It allows for viewing and recording of debug session output on your local machine or across the Internet without an active debugger.

Desktops
v2.0 (October 17, 2012)
This new utility enables you to create up to four virtual desktops and to use a tray interface or hotkeys to preview what’s on each desktop and easily switch between them.

Disk2vhd
v2.01 (January 21, 2014)
Disk2vhd simplifies the migration of physical systems into virtual machines (p2v.md).

DiskExt
v1.2 (July 4, 2016)
Display volume disk-mappings.

Diskmon
v2.01 (November 1, 2006)
This utility captures all hard disk activity or acts like a software disk activity light in your system tray.

DiskView
v2.4 (March 25, 2010.md)
Graphical disk sector utility.

Disk Usage (DU.md)
v1.61 (February 13, 2018)
View disk usage by directory.

EFSDump
v1.02 (November 1, 2006)
View information for encrypted files.

FindLinks
v1.1 (July 4, 2016)
FindLinks reports the file index and any hard links (alternate file paths on the same volume.md) that exist for the specified file.  A file's data remains allocated so long as at it has at least one file name referencing it.

Handle
v4.22 (June 14, 2019)
This handy command-line utility will show you what files are open by which processes, and much more.

Hex2dec
v1.1 (July 4, 2016)
Convert hex numbers to decimal and vice versa.

Junction
v1.07 (July 4, 2016)
Create Win2K NTFS symbolic links.

LDMDump
v1.02 (November 1, 2006)
Dump the contents of the Logical Disk Manager's on-disk database, which describes the partitioning of Windows 2000 Dynamic disks.

ListDLLs
v3.2 (July 4, 2016)
List all the DLLs that are currently loaded, including where they are loaded and their version numbers.

LiveKd
v5.62 (May 16, 2017)
Use Microsoft kernel debuggers to examine a live system.

LoadOrder
v1.01 (July 4, 2016)
See the order in which devices are loaded on your WinNT/2K system.

LogonSessions
v1.4 (July 4, 2016)
List the active logon sessions on a system.

MoveFile
v1.01 (January 24, 2013)
Allows you to schedule move and delete commands for the next reboot.

NotMyFault
v4.01 (November 18, 2016)
Notmyfault is a tool that you can use to crash, hang, and cause kernel memory leaks on your Windows system.

NTFSInfo
v1.2 (July 4, 2016)
Use NTFSInfo to see detailed information about NTFS volumes, including the size and location of the Master File Table (MFT) and MFT-zone, as well as the sizes of the NTFS meta-data files.

PendMoves
v1.2 (February 5, 2013)
Enumerate the list of file rename and delete commands that will be executed the next boot.

PipeList
v1.02 (July 4, 2016)
Displays the named pipes on your system, including the number of maximum instances and active instances for each pipe.

PortMon
v3.03 (January 12, 2012)
Monitor serial and parallel port activity with this advanced monitoring tool. It knows about all standard serial and parallel IOCTLs and even shows you a portion of the data being sent and received. Version 3.x has powerful new UI enhancements and advanced filtering capabilities.

ProcDump
v10.0 (September 17, 2020)
This command-line utility is aimed at capturing process dumps of otherwise difficult to isolate and reproduce CPU spikes. It also serves as a general process dump creation utility and can also monitor and generate process dumps when a process has a hung window or unhandled exception.

Process Explorer
v16.32 (April 28, 2020)
Find out what files, registry keys and other objects processes have open, which DLLs they have loaded, and more. This uniquely powerful utility will even show you who owns each process.

Process Monitor
v3.60 (September 17, 2020)
Monitor file system, Registry, process, thread and DLL activity in real-time.

PsExec
v2.2 (June 29, 2016)
Execute processes on remote systems.

PsFile
v1.03 (June 29, 2016)
See what files are opened remotely.

PsGetSid
v1.45 (June 29, 2016)
Displays the SID of a computer or a user.

PsInfo
v1.78 (June 29, 2016)
Obtain information about a system.

PsKill
v1.16 (June 29, 2016)
Terminate local or remote processes.

PsPing
v2.01 (January 29, 2014)
Measure network performance.

PsList
v1.4 (June 29, 2016)
Show information about processes and threads.

PsLoggedOn
v1.35 (June 29, 2016)
Show users logged on to a system.

PsLogList
v2.8 (June 29, 2016)
Dump event log records.

PsPasswd
v1.24 (June 29, 2016)
Changes account passwords.

PsService
v2.25 (June 29, 2016)
View and control services.

PsShutdown
v2.52 (December 4, 2006)
Shuts down and optionally reboots a computer.

PsSuspend
v1.07 (June 29, 2016)
Suspend and resume processes.

PsTools
v2.45 (July 4, 2016)
The PsTools suite includes command-line utilities for listing the processes running on local or remote computers, running processes remotely, rebooting computers, dumping event logs, and more.

RAMMap
v1.51 (May 31, 2018)
An advanced physical memory usage analysis utility that presents usage information in different ways on its several different tabs.

RegDelNull
v1.11 (July 4, 2016)
Scan for and delete Registry keys that contain embedded null-characters that are otherwise undeleteable by standard Registry-editing tools.

Registry Usage (RU.md)
v1.2 (July 4, 2016)
View the registry space usage for the specified registry key.

RegJump
v1.1 (April 20, 2015)
Jump to the registry path you specify in Regedit.

SDelete
v2.01 (February 13, 2018)
Securely overwrite your sensitive files and cleanse your free space of previously deleted files using this DoD-compliant secure delete program.

ShareEnum
v1.6 (November 1, 2006)
Scan file shares on your network and view their security settings to close security holes.

ShellRunas
v1.01 (February 28, 2008)
Launch programs as a different user via a convenient shell context-menu entry.

Sigcheck
v2.80 (June 24, 2020)
Dump file version information and verify that images on your system are digitally signed.

Streams
v1.6 (July 4, 2016)
Reveal NTFS alternate streams.

Strings
v2.53 (July 4, 2016)
Search for ANSI and UNICODE strings in binary images.

Sync
v2.2 (July 4, 2016)
Flush cached data to disk.

Sysmon
v12.0 (September 17, 2020)
Monitors and reports key system activity via the Windows event log.

TCPView
v3.05 (July 25, 2011)
Active socket command-line viewer.

VMMap
v3.26 (June 11, 2019)
VMMap is a process virtual and physical memory analysis utility.

VolumeId
v2.1 (July 4, 2016)
Set Volume ID of FAT or NTFS drives.

Whois
v1.20 (December 11, 2019)
See who owns an Internet address.

WinObj
v2.22 (February 14, 2011)
The ultimate Object Manager namespace viewer is here.

ZoomIt
v4.52 (December 11, 2019)
Presentation utility for zooming and drawing on the screen.

Источник: [https://torrent-igruha.org/3551-portal.html]
Table of Contents v2.0 32-bit serial key or number

Determine which versions and service pack levels of .NET Framework are installed

4.6.2Original Release
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Client
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full
Name: Release
Type: REG_DWORD
Data:
  • On Windows 10 Anniversary Update: 394802
  • On all other OS versions: 394806
4.6.1Original Release
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Client
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full
Name: Release
Type: REG_DWORD
Data:
  • On Windows 10 November Update systems: 394254
  • On all other OS versions: 394271
4.6Original Release
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Client
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full
Name: Release
Type: REG_DWORD
Data:
  • On Windows 10 systems: 393295
  • On all other OS versions: 393297
4.5.2Original Release
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Client
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full
Name: Release
Type: REG_DWORD
Data: 3798934.5.1Original Release
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Client
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full
Name: Release
Type: REG_DWORD
Data:
  • On Windows 8.1 or Windows Server 2012 R2: 378675
  • On Windows 8, Windows 7 SP1, or Windows Vista SP2: 378758
4.5Original Release
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Client
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full
Name: Release
Type: REG_DWORD
Data: 3783894 - ClientOriginal ReleaseHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\ClientName: Install
Type: REG_DWORD
Data: 1HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\ClientName: Version
Type: REG_SZ
Data: 4.0.30319.04 - FullOriginal ReleaseHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\FullName: Install
Type: REG_DWORD
Data: 1HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\FullName: Version
Type: REG_SZ
Data: 4.0.30319.03.5Original ReleaseHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5Name: Install
Type: REG_DWORD
Data: 1HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5Name: SP
Type: REG_DWORD
Data: 03.5Service Pack 1HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5Name: Install
Type: REG_DWORD
Data: 1HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5Name: SP
Type: REG_DWORD
Data: 13.0Original ReleaseFollow the deployment and detection guidance in Microsoft .NET Framework 3.0 Deployment Guide.HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.0Name: SP
Type: REG_DWORD
Data: 03.0Service Pack 1HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.0Name: Install
Type: REG_DWORD
Data: 1HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.0Name: SP
Type: REG_DWORD
Data: 13.0Service Pack 2HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.0Name: Install
Type: REG_DWORD
Data: 1HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.0Name: SP
Type: REG_DWORD
Data: 22.0Original ReleaseHKEY_LOCAL_MACHINE\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727Name: Install
Type: REG_DWORD
Data: 1HKEY_LOCAL_MACHINE\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727Name: SP
Type: REG_DWORD
Data: 02.0Service Pack 1HKEY_LOCAL_MACHINE\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727Name: Install
Type: REG_DWORD
Data: 1HKEY_LOCAL_MACHINE\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727Name: SP
Type: REG_DWORD
Data: 12.0Service Pack 2HKEY_LOCAL_MACHINE\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727Name: Install
Type: REG_DWORD
Data: 1HKEY_LOCAL_MACHINE\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727Name: SP
Type: REG_DWORD
Data: 21.1 (on 32-bit operating systems)Original ReleaseHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v1.1.4322Name: Install
Type: REG_DWORD
Data: 1HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v1.1.4322Name: SP
Type: REG_DWORD
Data: 01.1 (on 32-bit operating systems)Service Pack 1HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v1.1.4322Name: Install
Type: REG_DWORD
Data: 11.1 (on 64-bit operating systems)Original ReleaseHKLM\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v1.1.4322Name: Install
Type: REG_DWORD
Data: 1HKLM\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v1.1.4322Name: SP
Type: REG_DWORD
Data: 01.1 (on 64-bit operating systems)Service Pack 1HKLM\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v1.1.4322Name: Install
Type: REG_DWORD
Data: 1HKLM\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v1.1.4322Name: SP
Type: REG_DWORD
Data: 11.0 (on supported platforms except for Windows XP Media Center and Tablet PC)Original ReleaseHKEY_LOCAL_MACHINE\Software\Microsoft\Active Setup\Installed Components\{78705f0d-e8db-4b2d-8193-982bdda15ecd}Name: Version
Type: REG_SZ
Data: 1.0.3705.01.0 (on supported platforms except for Windows XP Media Center and Tablet PC)Service Pack 1HKEY_LOCAL_MACHINE\Software\Microsoft\Active Setup\Installed Components\{78705f0d-e8db-4b2d-8193-982bdda15ecd}Name: Version
Type: REG_SZ
Data: 1.0.3705.11.0 (on supported platforms except for Windows XP Media Center and Tablet PC)Service Pack 2HKEY_LOCAL_MACHINE\Software\Microsoft\Active Setup\Installed Components\{78705f0d-e8db-4b2d-8193-982bdda15ecd}Name: Version
Type: REG_SZ
Data: 1.0.3705.21.0 (on supported platforms except for Windows XP Media Center and Tablet PC)Service Pack 3HKEY_LOCAL_MACHINE\Software\Microsoft\Active Setup\Installed Components\{78705f0d-e8db-4b2d-8193-982bdda15ecd}Name: Version
Type: REG_SZ
Data: 1.0.3705.31.0 (shipped with Windows XP Media Center 2002/2004 and Tablet PC 2004)Service Pack 2HKEY_LOCAL_MACHINE\Software\Microsoft\Active Setup\Installed Components\{FDC11A6F-17D1-48f9-9EA3-9051954BAA24}Name: Version
Type: REG_SZ
Data: 1.0.3705.21.0 (shipped with Windows XP Media Center 2005 and Tablet PC 2005)Service Pack 3HKEY_LOCAL_MACHINE\Software\Microsoft\Active Setup\Installed Components\{FDC11A6F-17D1-48f9-9EA3-9051954BAA24}Name: Version
Type: REG_SZ
Data: 1.0.3705.3
Источник: [https://torrent-igruha.org/3551-portal.html]
.

What’s New in the Table of Contents v2.0 32-bit serial key or number?

Screen Shot

System Requirements for Table of Contents v2.0 32-bit serial key or number

Add a Comment

Your email address will not be published. Required fields are marked *